Found the starter relay in the Rotax engine box. I installed it and also the Fuel pressure sensor. Wiring was then completed that attached to the manifold pressure sensor, master relay and starter relay. The plans called for running the wires through a cushion clamp on the engine mount standoff, but I could not see anywhere in the plans were these cushion clamps were called out so I installed some that best fit.
Next session will call for breaking into that rotax box and starting to disassemble some of the engine parts in preparations for mounting the engine.
Time: 2.25 hrs.
 |
| Starter relay |
 |
| Fuel Pressure Sensor |
 |
| Wiring to manifold pressure sensor |
 |
| Wiring to master relay |
 |
| Firewall FWD wiring |
 |
| Firewall FWD wiring |
No comments:
Post a Comment