I spend a few hrs organizing tools in preparation for getting them to the hangar. I had to decide what tools went and which stayed at home in my shop. I then received the vinyl N # placard that I ordered at doityourselflettering.com. It is also where I ordered the vinyl numbers for the tail.
I then loaded some items into my truck that I wanted to get to the hangar and made sure the trailer was all ready to go.
I had a few moments and still needed to work on trimming the wings to allow space for the seal. I trimmed and filed the lower edges of each wing while it was in the cradle. The upper edge will be easier to do out of the cradle and on saw horses, so I will do that once the plane and trailer are out of the shop.
 |
| N # placard |
 |
| Loaded and ready for transport |
No comments:
Post a Comment