With the help of S and N, I was able to get the rear window installed. This took a little time as fuel sealant had to be placed between the window and the turtle skin. The rear window was first placed and ever 4th screw installed, but not tightened. Then electrical tape was placed in preparation for placing fuel sealant. Fuel sealant was placed in the small gap between the window and skin and then the screws and nuts were tightened. This was a messy job but in the end I think it turned out well.
I then worked on some misc. items. The tunnel cover was installed. The anti-abrasion strip was then placed on the mid fuse brace.
I then thought I would get started on installing the interior package. I started with the baggage wall. I test fitted the section and then installed the velcro. Not enough time today to continue so I will have to pick up next time.
Time: 3 hrs.
 |
| Installing rear window |
 |
| Rear window installed |
 |
| Installed tunnel cover |
 |
| Anti-abrasion strip |
 |
| Trying in baggage sidewall carpet |
 |
| Velcro placed |
No comments:
Post a Comment