Canopy fitting

Today was the big day of getting the canopy out of the box.  We worked at fitting it onto the frame and checking all measurements as per plans. The hole drilled for the latch handle tube seemed a little off. (A few days later after reading some posts from others, if I made sure the blocks were contacting all the way up and down on the frame then the hole seemed to line up better.)  I had the back window on originally, but it seemed to interfere some.  I will most likely have to trim either the back of the canopy or the front of the rear window. We will see.

Time: 1.25 hrs

Add caption

Add caption