Stabilator / Steps / Fuses / Pitot tube

Started today with several misc. items. With the help of S & N I was able to re-attached the stabilator. I then installed the steps and the fuses. The replacement fuses were then placed in a block on the back of the map box door.

I then started section 47 - Spinner & Propeller. The pitot tube was prepared with the pitot block as per plans. This involved making a slight dimple (or drilled indentation) in the pitot tube. The block and pitot tube were then installed. The pitot tubes were then attached with safety wire. I prepared the spinner by trimming and sanding to the time line. The bushing was then placed in the spinner. I used superglue for this step.  The spinner plate and hub mount half was then installed. Bolts were torqued as per specified with the propeller.

Time: 3.5 hrs

Stabilator Re-attached

Step

Fuses placed

Fuse replacements

Pitot Block

Pitot Tube

Pitot Tube attached

Spinner

Spinner Plate and Hub mount Half