Fiberglass time again today. I started by placing the duct interface on the cooling duct with epoxy. The cooling duct was then placed on the bottom cowl with epoxy and clecoed. Strips of fiberglass were then placed as per plans inside the cooling duct interface and front portion of the cooling duct above the oil cooler. The bottom and top cowls were then put in place and now we will wait for the epoxy to set.
Time: 1.5 hrs
 |
| Fiberglass Cooling Duct Interface |
 |
| Fiberglass cooling duct |
 |
| Cooling duct in place for set |
 |
| Top cowl in place while epoxy sets. |
No comments:
Post a Comment