Today was time to get back to work on the canopy. The canopy frame was reinstalled. The canopy and canopy skirt was then screwed and riveted into place as per plans. The was some interference on closing with the left canopy skirt, so I bent it out slightly and it closes better. The canopy latch, blocks, and switch were then installed. I then masked and taped the are to get it ready for the laying of fiberglass. The foam block was trimmed and then glued to the canopy frame with epoxy.
Time: 5.75 hrs
 |
| Canopy frame installed |
 |
| Screws placed rear canopy |
 |
| Canopy skirt riveted |
 |
| Latch block |
 |
| Canopy micro switch |
 |
| Guide blocks |
 |
| Area taped and masked for fiberglass work |
 |
| Foam block cut and epoxied into place |
No comments:
Post a Comment