Started off today by attaching the rudder cable links. It was a little tight of a space to get in there but was able to get it done. I then joined the stabilator cables and tightened them some. I need to borrow a cable tensioner if I can to get the proper tension.
I then started on installing the Garmin autopilot servos. Pushrods were fabricated as per plans and then the pitch servo and rod was installed.
Time: 2.25 hrs
 |
| Rudder Cable links |
 |
| Stabilator cable tightening |
 |
| Autopilot pushrods |
 |
| Pitch servo |
 |
| Pitch servo and rod |
No comments:
Post a Comment