I was able to get a good start on the cooling system. I started by cutting lengths of radiator hose and placing springs in them as per plans. I then worked on the cooler box assembly by cutting the stainless steel hinge and attaching the cooler box assembly to firewall.
I need to purchase some more high temp RTV sealant to create the seal so I skipped a few steps for now and installed the oil tank assembly. The oil vent was installed. It required placing a cushion clamp at the location of the gascolator. This was very tricky as there wasn't much room to work in, but I finally got it accomplished.
The overflow bottle was installed along with the overflow tubing which then attached to stem on the expansion tank assembly.
Time: 3
 |
| Cooler box face & hinge |
 |
| Cooling box structure installed |
 |
| Oil tank assembly |
 |
| Oil vent line |
 |
| Oil vent line in cushion clamp |
 |
| Overflow bottle |
 |
| Overflow bottle hose attached |
No comments:
Post a Comment