Riveted the leading edge of the left wing. Attached the hinge ribs and brackets. These were a little tricky to get the rivets in as there was some interference with other rivets. I detemined it would be best to placed the rivets from the rib and bracket to the wing rib first and then place the rivets from the bottom skin and rear spar second, unlike the plans say. I then had a little time and clecoed the inboard upper skin.
Time: 1.25 hrs.
 |
| Rivet leading edge |
 |
| Hinge bracket |
 |
| Hinge Bracket |
 |
| Cleco inbd upper wing skin |
No comments:
Post a Comment